2sp0115t2a0

Basic Info.

Model NO.	2SP0115T2A0-12
Model	ST
Batch Number	2010+
Brand	Pi
Specifications IGBT Voltage Class	1200 V
Technology	Scale-2
Configuration	Dual
Transport Package	Carton
Trademark	Power Integrations
Origin	USA
Production Capacity	50000 PC/ Year

Product Description

MODEL:

2SP0115T2A0-12

2SP0115T2B0-12

2SP0115T2C0-12

Power Integrations

Dual-Channel SCALE-2 Plug-and-Play Driver for 17mm IGBT Modules, Full Function Across the Range, Embedded Paralleling Capability

The SCALE-2 plug-and-play driver 2SP0115T2A0-12 is a compact dual-channel intelligent gate driverdesigned for 1200V 17mm dual IGBT modules. The driver features an electrical interface with a built-in DC/DC power supply.
The turn-on and turn-off gate resistors of both channels are not assembled in order to providemaximum flexibility. They must be assembled by the user before start of operation. Please refer tothe paragraph on "Gate Resistor Assembly" for the recommended aate resistors

Summary of Features

• Plug-and-play solution
• Allows parallel connection of IGBT modules
• Shortens application development time
• Extremely reliable; long service life
• Built-in DC/DC power supply
• 20-pin flat cable interface
• Duty cycle 0... 100%
• Active clamping of Vce at turn-off
• IGBT short-circuit protection
• Monitoring of supply voltage
• Safe isolation to EN 50178
• UL compliant
• Suitable for 1700V 17mm dual IGBT modules
• Gate resistors not assembled

Benefits

Applications

• Wind-power converters
• Industrial drives
• UPS
• Power-factor correctors
• Traction
• Railroad power supplies
• Welding
• SMPS
• Radiology and laser technology
• Research

Product Details

2SP0115T is a ultra-compact driver series for 17mm as EconoDUAL™ IGBT modules. As a member Power Integrations' plug-and-play driver family, it satisfies industry's requirements for optimized electrical performance and noise immunity.

The highly integrated SCALE-2 chipset reduces the component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing cost.

The use of SCALE-2 technology also means that 2SP0115T devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring.

Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realised without compromising overall system efficiency.

The embedded paralleling capability allows simple inverter design for higher power ratings.

Specifically adapted drivers are available for all module types. The DIC20 electrical interface is very simple and easy to use.

Driving Parallel-Connected IGBTs

The driver allows direct parallel connection of any number of 17mm modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.

Electrical Interface DIC20

The 2SP0115T driver series is equipped with DIC20 electrical interface and is fully compatible with the PrimePACK™ driver series 2SP0320T. The DIC20 electrical interface is very simple and easy to use.

The driver has the following terminals:

• Power supply and GND terminals
• 2 x drive signal inputs
• 2 x status outputs (failure returns)
• 1 x mode selection (half-bridge mode / direct mode)
• 1 x input to set the blocking time

All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. For more details, check the product documentation.

A version with extended operating temperature range of -40°C...85°C (2SP0115T2B0) can also be supplied.

Specifications

Specifications

IGBT Voltage Class	1200 V
Technology	SCALE-2
Power - Output/Channel (Max)	1.20 W
Interface Type	Electrical
Number of Channels	2
Gate Peak Current (Max)	+15 A
Product Type	Board
Product Sub-Type	PnP Driver
Supported Module Type	IGBT
Main/Peripheral	N/A
Supported Topologies	2-level Voltage Source3-level NP-Clamped - Type 13-level NP-Clamped - Type 2Multi-Level NP-Clamped
Protection Features	Adv Active ClampingOver-voltageShort CircuitUVLO(Sec-side)UVLO(Pri-side)
Driving Mode	HalfbridgeDirect-Independent
Connection Type to IGBT	Direct
Logic Input Voltage	5
Supply Voltage (Typ)	15.00 V
Gate Turn-on Voltage	+15.00 V
Gate Turn-off Voltage	--9.20 V
Time - Output Rise	5.00 ns
Time - Output Fall	10.00 ns
Isolation Technology	Galvanic
Isolation Type	Reinforced
Gate Peak Current (Min)	-8

About Power Integrations

Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.

Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.

COMPANY PROFILE
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. in Infineon, Semi kron, HITACHI, Fuji, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.
Storage & Delivery

SHIPPING
1.FEDEX/DHL/UPS for samples.2.By Sea for batch goods.3.Customers specifying freight forwarders or negotiable shipping methods.
FAQ
1.Q :What's the MOQ. Can I get a sample of free? A : MOQ, according to the actual situation. We can offer a sample of free. Please, friendly bear the shipping cost. 2.Q : When can i get the quotation? A : We usually quote within 24 hours after getting your detailed requirements, like size, quantity, etc. 3.Q : What is your payments terms? A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms. 4.Q : What is your terms of delivery? A : We accept FOB, CFR, CIF, EXW, etc. You can choose the most convenient way for you. Besides that, we can also shipping by Air and Express.