2SD300c17A2 30 a Gate Current and 2 X 4 W Drive Power for IGBT Calculated Mtbf

Basic Info.

Model NO.	2SD300C17A2
Model	ST
Batch Number	2010+
Brand	Pi
Specifications IGBT Voltage Class	1700 V
Technology	Scale-2
Configuration	Dual
Transport Package	Carton
Trademark	Power Integrations
Origin	USA
Production Capacity	50000 PC/ Year

Product Description

MODEL:

2SD300C17A2

2SP0320V2A0-12/17

Power Integrations

Dual-channel SCALE-2 driver core, highest integration level, second source for Infineon™ 2ED300C17-S, 30 A gate current and 2 x 4 W drive power

The new 2SD300C17 SCALE-2 dual-driver core is a second source for and is fully pin and function-compatible with Infineon's 2ED300C17-S. It targets high reliability applications.

Advantages of the Technology

The use of CONCEPT's highly integrated SCALE-2 chipset uses 63% fewer components than the 2ED300C17-S.

This results in a significant improvement in reliability (both calculated MTBF and measured) and reduced costs. The 2SD300C17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, failure soft shut down, short pulse suppression as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel.

The driver provides a gate voltage swing of ±15 V. An output current of 30 A and 4 W drive power is available per channel.

Excellent EMC performance with a dv/dt strength of more than 50 V/ns allows safe and reliable operation even in demanding industrial applications.

Summary of Features

• Dual channel driver
• Highly integrated SCALE-2 chipset
• Switching frequency up to 60kHz
• Gate current 30A
• 4W output power per channel
• Direct and half-bridge mode
• IGBT short-circuit protection
• Failure soft shut down
• Isolated DC/DC converter
• Safe isolation to EN 50178
• UL compliant
• Reliable, long service life
• Lead free

Benefits

Applications

• IGBT 1700 V

Product Details

The SCALE-2 dual-driver cre 2SD300C17A2 / 2SD300C17A2C (Coated version using ELPEGUARD SL 1307FLZ/2 from Lackwerke Peters) is designed for applications in which high reliability is expected.The use of Power Integrations' highly integrated SCALE-2 chipset allows 63% of the components to bedispensed with compared to conventional drivers. This advantage is impressively reflected in increasedreliability (function and MTBF).
The 2SD300C17A2(C) combines a complete two-channel driver core with all components required for driving,such as an isolated DC/DC converter, short-circuit protection, failure soft shut down, short pulse suppressionas well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primaryside and the other secondary channel.
The driver provides a gate voltage swing of +15V. An output current of 30A and 4W drive power is availableper channel.
Its outstanding EMC with a dv/dt strenath of more than 50V/ns allows safe and reliable operation in even thedemanding industrial applications

Specifications

Specifications

Max Switching Frequency	60.00 kHz
IGBT Voltage Class	1700 V
UL Compliant	compliant
Technology	SCALE-2
ROMS	Yes
Product Type	Driver Core
Power - Output/Channel (Max)	4.00 W
Interface Type	Electrical
Options Info	Conformal Coated Version 2SD300C17A2C
Number of Channels	2
Footnote	Dual-Channel 1700 V SCALE ™ -2 Driver Core
Gate Peak Current (Max)	+30 A
Product Type	Board
Product Sub-Type	Driver Core
Supported Module Type	IGBT
Main/Peripheral	N/A
Supported Topologies	2-level Voltage Source
Protection Features	Adv Active ClampingShort CircuitSoft ShutdownUVLO(Sec-side)UVLO(Pri-side)
Driving Mode	Direct-InterlockDirect-Independent
Logic Input Voltage	15
Supply Voltage (Typ)	15.00 V
Gate Turn-on Voltage	+15.00 V
Gate Turn-off Voltage	--15.00 V
Isolation Technology	Galvanic
Isolation Type	Reinforced
Gate Peak Current (Min)	-30

About Power Integrations

Power Integrations, Inc., is a leading innovator in semiconductor technologies for high-voltage power conversion. Our products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in a vast range of applications including appliances, mobile devices, computers and countless industrial applications.

Energy-saving technologies such as our PowiGaN™ gallium-nitride technology and our EcoSmart™ energy-efficiency technology prevent billions of kilowatt-hours of energy waste each year, while our highly integrated chips save billions of electronic components each year. Reflecting the environmental benefits of our products, Power Integrations' stock is a component of clean-technology stock indices sponsored by Cleantech Group LLC and Clean Edge, and our Green Room provides a comprehensive guide to energy-efficiency standards around the world.

COMPANY PROFILE
Shenzhen Botong Electric Co., Ltd. is a professional distributor of imported branded products, located at 7S Yindu, Building 100, No. 4 Zhonghang Road, Huahang Community, Huaqiang North Street, Futian District, Shenzhen. Headquartered in Beijing (established in 2006), with offices in Shandong and Hebei. Its business involves power electronic components and supporting PI drive boards, LEM sensors, fans, and capacitors. Our company acts as an agent for the distribution of IGBT, IPM, PIM, rectifier bridge, thyristor, diode, etc. in Infineon, Semi kron, HITACHI, Fuji, Mitsubishi, SanRex, IXYS, etc; Ximenkang, PI driver board; Liteon optocoupler; Japan Jianzao IDC driver module; Electrolytic capacitor; Electronic components such as absorption capacitors (CAPSIT). Mainly used in: industrial automation, high-voltage inverter, UPS, inverter welding machine, inverter, high-frequency induction heating, commercial induction cooker, inverter power supply, wind and solar power generation, electric locomotive, electroplating power supply, soft start and other fields. We meet customer needs with excellent product performance, high reliable quality, superior service, the most favorable price and delivery time.
Storage & Delivery

SHIPPING
1.FEDEX/DHL/UPS for samples.2.By Sea for batch goods.3.Customers specifying freight forwarders or negotiable shipping methods.
FAQ
1.Q :What's the MOQ. Can I get a sample of free? A : MOQ, according to the actual situation. We can offer a sample of free. Please, friendly bear the shipping cost. 2.Q : When can i get the quotation? A : We usually quote within 24 hours after getting your detailed requirements, like size, quantity, etc. 3.Q : What is your payments terms? A : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms. 4.Q : What is your terms of delivery? A : We accept FOB, CFR, CIF, EXW, etc. You can choose the most convenient way for you. Besides that, we can also shipping by Air and Express.